The ASCO Dry Ice Pelletizer P55i is one of the most powerful dry ice machines from ASCO's i-Series line. Having a production capacity of 550 kg/h (1'212 lb/h) it meets the demands for high dry ice quantities plus quality and flexibility in the daily working process.
As a model of ASCO's i-Series, it is equipped with state-of-the-art remote control devices and thus is ready for a wide range of services in the areas of Remote Access, Remote Data, Remote Management. Be it for fast and efficient trouble shooting and maintenance or for gathering production and performance data - the ASCO i-Series offers a wide range of possibilities to link Industry 4.0 with dry ice production.
The ASCO Dry Ice Pelletizer P55i is driven by two powerful hydraulic units, which are running independently by the push of a button. This allows the production of identical or different pellet sizes in combination with the offered extruder plates at the same time. All functions are controlled by a Siemens PLC with a 12" touch screen.
A fully automatic control of oil temperature and dry ice snowing process guarantees continuous dry ice production without any supervision right from pushing the start button.
We are happy to advise you by telephone if you have any questions about our product. Or simply write to us via our contact form.
+41 71 466 80 80
Reduced dry ice production costs. Thanks to CO2-Recovery.
When dry ice is produced the conversion rate from liquid CO2 to dry ice is approx. 40 - 45 %. This means 55 - 60 % is lost to the atmosphere. This conversation rate is a physical fact and therefore, unfortunately, not to change. With an ASCO CO2 Revert Recovery System, however, most of the CO2 can be recovered which leads to a final conversion rate up to 95 %. This way, the dry ice production costs are reduced up to 50 %.
The ASCO Dry Ice Pelletizer P55i is driven by two powerful hydraulic units, which are running independently by the push of a button. This allows the production of identical or different pellet sizes in combination with the offered extruder plates at the same time.
550 kg/h (1'212 lb/h) ± 10 % at 17 - 20 bar (246 - 290 psi) CO2 inlet pressure
400 V / 50 Hz / 3 Ph + PE (other voltages on request with surcharge)
Max. power consumption
11.3 kW (15.2 HP)
Dimensions (L x W x H)
1‘600 × 1‘500 × 1‘650 mm (63 x 59 x 65 in)
1'660 kg (3'660 lb) (without hydraulic oil) 1'770 kg (3'902 lb) (with hydraulic oil)
approx. 1'830 kg (4'034 lb) (without hydraulic oil)